Buy PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp - Affordable Price
Di uno scrittore di uomini misteriosi
Descrizione
PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp and 4000+ products for makers at . Worldwide shipping at the same day. Explore and buy right now!
PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn\'t natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then separates the data (Ethernet) and power (5 VDC regulated) into two different lines for non-PoE devices. This is an economical, practical, high-performance, and reliable Isolated 5V 2.4A PoE Splitter with MicroUSB Plug based on IEEE 802.3af standard. It can divide power and data signals from a network cable, and can be used with any PoE injector that is compatible with IEEE 802.3af, and supply power and data for non-PoE network equipment. Connect to your PoE switch or hub, then on the other side of the Ethernet cable, you\'ll get Ethernet and a high quality 5V power supply, up to 2.4 Amps. This is perfect for use with a Raspberry Pi model B, B+, Pi 2 or Pi 3 since those have Ethernet and micro USB power, and 2.4 Amp is plenty of current for even the most accessorized Pi. (It isn\'t a good match for the Pi Zero or A+ because those don\'t have Ethernet, although you could use an Ethernet hub.) It also works great with Arduino boards and compatibles that have Ethernet and micro USB like the Seeed Cloud or an Arduino-compatible with an Ethernet shield - just check that the compatible has a micro USB power input! Please note that like many active PoE splitters, there\'s a minimum load requirement of at least 100mA on the 5V power supply. We don\'t think this is going to be a problem since anything with Ethernet will tend to draw 200mA+, but please keep it in mind! Technical Details: Ethernet cable length: 205mm / 8\ MicroUSB cable length: 205mm / 8\ Body dimensions: 80mm x 30mm x 24mm / 3\ x 1\ x .8\ Features: IEEE 802.3af compliant Supports 10/100M data transmission (not for Gigabit ethernet) Supports 48V Unsolicited Power Over Ethernet PoE Switches/Hubs/Adapters with a 44V-57V power voltage input Operation temperature: 20°C - 45°C Storage temperature:- 30°C - 70°C Isolation: 2.5kV Power Input: 44~57V DC Power Output: 5V DC 2.4A Product Weight: 54.1g / 1.9oz
PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn\'t natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then separates the data (Ethernet) and power (5 VDC regulated) into two different lines for non-PoE devices. This is an economical, practical, high-performance, and reliable Isolated 5V 2.4A PoE Splitter with MicroUSB Plug based on IEEE 802.3af standard. It can divide power and data signals from a network cable, and can be used with any PoE injector that is compatible with IEEE 802.3af, and supply power and data for non-PoE network equipment. Connect to your PoE switch or hub, then on the other side of the Ethernet cable, you\'ll get Ethernet and a high quality 5V power supply, up to 2.4 Amps. This is perfect for use with a Raspberry Pi model B, B+, Pi 2 or Pi 3 since those have Ethernet and micro USB power, and 2.4 Amp is plenty of current for even the most accessorized Pi. (It isn\'t a good match for the Pi Zero or A+ because those don\'t have Ethernet, although you could use an Ethernet hub.) It also works great with Arduino boards and compatibles that have Ethernet and micro USB like the Seeed Cloud or an Arduino-compatible with an Ethernet shield - just check that the compatible has a micro USB power input! Please note that like many active PoE splitters, there\'s a minimum load requirement of at least 100mA on the 5V power supply. We don\'t think this is going to be a problem since anything with Ethernet will tend to draw 200mA+, but please keep it in mind! Technical Details: Ethernet cable length: 205mm / 8\ MicroUSB cable length: 205mm / 8\ Body dimensions: 80mm x 30mm x 24mm / 3\ x 1\ x .8\ Features: IEEE 802.3af compliant Supports 10/100M data transmission (not for Gigabit ethernet) Supports 48V Unsolicited Power Over Ethernet PoE Switches/Hubs/Adapters with a 44V-57V power voltage input Operation temperature: 20°C - 45°C Storage temperature:- 30°C - 70°C Isolation: 2.5kV Power Input: 44~57V DC Power Output: 5V DC 2.4A Product Weight: 54.1g / 1.9oz
PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp — PMD Way
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any
PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp
PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp
Raspberry Pi4B (4GB) plus POE Hat - Review - element14 Community
Where to buy Open Source Network Card or Network Adapter(HW) - Hardware - Ubuntu MATE Community
Support international standard IEEE802.3 af(12.5W); POE port support 10/100/1000Mbps data transmission. Transfer Rate: 10/100/1000Mbps, Standard: IEEE
Gigabit Micro USB PoE Splitter 5V 2.4A, IEEE 802.3af Standard 10/100/1000Mbps for Raspberry Pi 4, Google WiFi, Tablets, Dropcam Power Over Ethernet
PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp
DSLRKIT Active PoE Splitter Power Over Ethernet 48V to 5V 2.4A Micro USB Plug for RPi B/B+/2/3 : Electronics
PoE Splitter with USB Type C - 5V 2A - 100 MB Ethernet — Little Bird
PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp
UCTRONICS PoE Splitter Gigabit 5V - Micro USB Power and Ethernet to Raspberry Pi 3B+, Work with Echo Dot, Most Micro USB Security Camera and Tablet - IEEE 802.3af Compliant : Electronics
12W PoE Splitter 48V to 5V 2.4A Micro USB Adapter Power Over Ethernet Connector
PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp : ID 3785 : $10.95 : Adafruit Industries, Unique & fun DIY electronics and kits
UCTRONICS PoE Splitter Gigabit 5V - Micro USB Power and Ethernet to Raspberry Pi 3B+, Work with Echo Dot, Most Micro USB Security Camera and Tablet
da
per adulto (il prezzo varia in base alle dimensioni del gruppo)
